Sub Distribution Boards

Cover bracket, 45 mm high, for mounting (inserting, turning) on EDF profile rails, as well as for latching a bulkhead on, with 35 x 7.5 mm top-hat rails, only this cover bracket must be used; packaging unit — 4 pieces.

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this cover bracket must be used; packaging unit — 40 pieces.

Cover bracket, 88 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on; to be used when installing devices at greater depths or with busbar systems; packaging unit — 4 pieces.

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this cover bracket must be used; packaging unit — 12 pieces.

Cover bracket, 45 mm high, for mounting (inserting, turning) on EDF profile rails, as well as for latching a bulkhead on, with 35 x 7.5 mm top-hat rails, only this cover bracket must be used; packaging unit — 40 pieces.

Support insulator with wrench flat, diameter x length

Support insulator with wrench flat, diameter x length

Washer, 5 mm, DIN 125, zinc-plated, for M5 screws.

Lens-tapping screw with a hexalobular socket and slit, Torx screw T25 M 4.8 x 11.5 mm.

Device carrier/connector, for connecting EDF and WR mounting frames.

Mounting bracket for the ZK90P2 insulator, in conjunction with the lowered assembly of the ZX371 top-hat rail for row clamps.

Spacer for meter support plates, field width 1, suitable for M(B)Z160, M(B)Z161.