Weighing technology

SITRANS WM100 A heavy-duty zero-speed alarm switch that does not require a controller. (description not available) Model: 115 V AC (description not available) (description not available) (description not available) Manufacturer's Test Certificate: According to EN 10204-2.2

MILLTRONICS BW500 A FULL-FEATURE, POWERFUL INTEGRATOR DESIGNED FOR USE WITH BOTH BELT SCALES AND WEIGHFEEDERS INPUT VOLTAGE: DC VOLTAGE 10-30V AUXILIARY INPUT / OUTPUT BOARD: NONE FEATURE SOFTWARE: BW500, 1 ... 6 LOAD CELL INPUT (ADVANCED FEATURE SET) AUXILIARY MEMORY: NONE DATA COMMUNICATIONS: SMARTLINX READY ENCLOSURE: STANDARD ENCLOSURE, 4 ENTRIES, M20 TRADE APPROVAL STICKER: NO TRADE APPROVAL STICKER APPROVALS: CE,...

Milltronics BW500 A full-feature, powerful integrator designed for use with both belt scales and weighfeeders Input voltage: AC voltage 100-240V Auxiliary Input / Output Board: Board with 2 analog inputs and 2 analog outputs (required for PID control and on-line calibration) Feature Software: BW500, 1 ... 6 load cell input (advanced feature set) Auxiliary Memory: none Data Communications: Smartlinx PROFIBUS...

Milltronics BW500 A full-feature, powerful integrator designed for use with both belt scales and weighfeeders Auxiliary Input / Output Board: None Feature Software: BW500, 1 ... 6 load cell input (advanced feature set) Auxiliary Memory: none Data Communications: Smartlinx PROFIBUS DP module Enclosure: standard enclosure, no entry holes Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM,...

MILLTRONICS BW500 A FULL-FEATURE, POWERFUL INTEGRATOR DESIGNED FOR USE WITH BOTH BELT SCALES AND WEIGHFEEDERS INPUT VOLTAGE: AC VOLTAGE AUXILIARY INPUT / OUTPUT BOARD: NONE FEATURE SOFTWARE: BW500/L, 1... 2 LOAD CELL INPUT (BASIC FEATURE SET AUXILIARY MEMORY: NONE DATA COMMUNICATIONS: SMARTLINX READY ENCLOSURE: STANDARD ENCLOSURE, 4 ENTRIES, M20 TRADE APPROVAL STICKER: NO TRADE APPROVAL STICKER APPROVALS: CE, CSA US/C,...

Milltronics Motion sensing probes: heavy duty, 100 mm measuring range, for use with RMA, MFA 4p, WM300 MFA, or other control. Cable length: Standard length (per notes in model section) Model: MSP-12, 1/2" NPT cable inlet no cable Approval: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, KC, CCSAUS, FM

Milltronics Motion sensing probes: heavy duty, 100 mm measuring range, for use with RMA, MFA 4p, WM300 MFA, or other control. Cable length: Standard length (per notes in model section) Model: MSP-7, 1/2 inch NPT cable inlet, 1.5 m (5 ft) cable standard (For use directly with PLC, 3-wire) Approval: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC, CCSAUS,...

MOTION SENSING PROBES CE: A SERIES OF MOTION SENSING PROBES USED WITH THE MFA 4P CABLE LENGTH: STANDARD LENGTH (PER NOTES IN MODEL SECTION) MODEL: MSP-12, 1/2" NPT CABLE INLET APPROVAL: CE CABLE GLAND: ADAPTOR FOR 1/2-NPT TO M20 COMPLETE WITH CABLE GLANDS (NOT FOR USE WITH XPP-5)

Remote mounted amplifier(RMA): Remote mounted amplifier for Milltronics MSP-1, MSP-3 and MSP-9 motion sensing probes . Enclosure: Aluminium enclosure, 1/2" NPT entry

Milltronics MFA 4p Motion failure alarm controller: set-point alarm controller, for use with MSP motion probes. Enclosure: NEMA 4X, Polycarbonate enclosure Input voltage: 100/115/200/230 VAC, 50/60 Hz, switch selectable. Speed detection version: standard, underspeed (U/S) or overspeed (O/S), switch selectable Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, KC, CCSAUS, FM

Milltronics Motion sensing probes: heavy duty, 100 mm measuring range, for use with RMA, MFA 4p, WM300 MFA, or other control. Cable length: Standard length (per notes in model section) Model: MSP-3, 1/2" NPT conduit entry with 1.5 m (5 ft) high temperature cable, only with Remote mounted amplifier (RMA) Approval: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC,...

MOTION SENSING PROBES CE: A SERIES OF MOTION SENSING PROBES USED WITH THE MFA 4P CABLE LENGTH: STANDARD LENGTH (PER NOTES IN MODEL SECTION) MODEL:MSP-1 WITH 1.8M (6 FT) OF CABLE, ONLY WITH REMOTE MOUNTED AMPLIFIER (RMA) APPROVAL: CE