Abb – GHC0110003R0001

Temperature sensor C011-160, in accordance to DIN44081, blue - red, 160°C

Temperature sensor C011-150, in accordance to DIN44081, black - black, 150°C

Temperature sensor C011-130, in accordance to DIN44081, blue - blue, 130°C

Temperature sensor C011-140, in accordance to DIN44081, white - blue, 140°C

Temperature sensor C011-110, in accordance to DIN44081, brown - brown, 110°C

Temperature sensor C011-100, in accordance to DIN44081, red - red, 100°C

Temperature sensor C011-170, in accordance to DIN44081, white - green, 170°C

Temperature sensor C011-80, in accordance to DIN44081, white - white, 80°C

Temperature sensor C011-90, in accordance to DIN44081, green - green, 90°C

Triple-temperature sensor C011-3-150, black - black, 150°C

The CM-MSS.31P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 1 n/c + 1 n/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The sensor circuit of the CM-MSS.31P is short-circuit, as well as interrupted-wire monitored and the relay can be reset automatically, manually or remotely after the failure has been removed. This protection relay is certified according to the ATEX directive 94/9/EC and is equipped with a reset / test button. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

The CM-MSS.51P belongs to the CM thermistor motor protection relay range. It operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features two sensor circuit to monitor PTC temperature sensors (single or accumulative evaluation, configurable) and works according to the closed-circuit principle. The sensor circuits of this CM-MSS.51P are short-circuit (configurable), as well as interrupted-wire monitored and can be reset automatically, manually or remotely after the failure has been removed. This protection relay is certified according to the ATEX directive 94/9/EC and is equipped with a reset / test button. The non-volatile fault storage, the short circuit detection and the accumulative evaluation can be enabled/disabled via DIP switches. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.