Siemens – 1FG1510-9QG53-2HM1-Z D23

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K149 Motor type CT 600V AH100 Mmax=150 Solid shaft with keyway V90x170 ABSOLUTE ENCODER SINGLETURN 20 BIT WITH DRIVE-CLIQ INTERFACE (ENCODER AS20DQI) FOOT-MOUNTED TYPE GEAR RATIO: 127.16 N1MAX=4500 RPM N2MAX=35 RPM, M2MAX=8160 NM MOUNTING POSITION M2-A Radially reinforced output shaft bearing LONG-LIFE SEALING OIL CLP VG220

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K129 Motor type CT 600V AH100 Mmax=150 Solid shaft on both ends with Keyway VD70x140 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FOOT-MOUNTED TYPE GEAR RATIO: 144.53 N1MAX=4500 RPM N2MAX=31 RPM, M2MAX=4480 NM MOUNTING POSITION M1-A OIL CLP VG220 Holding brake with increased braking torque

SIMOTICS S-1FG1 SYNCHRONOUS SERVO GEARMOTOR BEVEL GEARING K129 MOTOR TYPE CT 600V AH100 MMAX=80 HOLLOW SHAFT W. FEATHER KEYWAY H70 RESOLVER 2-POLE WITH DRIVE-CLIQ INTERFACE PLUG-ON VERSION GEAR RATIO: 127.77 N1MAX=4500 RPM N2MAX=35 RPM, M2MAX=4480 NM MOUNTING POSITION M2-A OIL CLP VG220 STANDARD HOLDING BRAKE

SIMOTICS S-1FG1 synchronous servo geared motor bevel gearbox K129 motor type CT 600V AH100 Mmax=108.0 Nm Pn=4.7 kW Hollow shaft with keyway H70 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE PLUG-ON VERSION GEAR RATIO: 194.47 N1MAX=4500 RPM N2MAX=23 RPM, M2MAX=4480 NM

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K149 Motor type CT 600V AH100 Mmax=150 Solid shaft on both ends with Keyway VD90x170 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FOOT-MOUNTED TYPE GEAR RATIO: 140.93 N1MAX=4500 RPM N2MAX=32 RPM, M2MAX=8160 NM MOUNTING POSITION M1-A OIL CLP VG220 Holding brake with increased braking torque

SIMOTICS S-1FG1 - Geared motor Bevel gearbox K109 Motor CT 600V AH100 Mmax=280Nm Encoder: AS24DQI-88 / AS24DQI-72 Foot-mounted des.; transmission ratio i=6,83 N1max=4500rpm; N2max=659rpm; M2max=1320Nm; D14:Mounting pos. M4-A E01: Angle of rotation Y axis 5° G48: Oil expansion unit 1.5 l G97: Bonded final stage K12: OEL CLP ISO PAO VG220 K82: Manual brake release with check N34:Spring-operated brake M2BR=80Nm Q92: Connector position at bottom Q94:Connector outlet direction fixed Q95:Position manual venting bottom R72:Encoder for low temperature R92:Screw pl(*)

SIMOTICS S-1FG1 synchronous servo geared motor bevel gearbox K89 motor type CT 600V AH80 Mmax=50.0 Nm Pn=2.95 kW Hollow shaft with keyway H50 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FOOT-MOUNTED TYPE GEAR RATIO: 24.86 N1MAX=4500 RPM N2MAX=181 RPM, M2MAX=1610 NM MOUNTING POSITION M1-A Seal increased environmental pollution OIL CLP VG220 Spring-operated brake M2BR=22 Nm

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K129 Motor type CT 600V AH80 Mmax=37 Solid shaft with keyway V70x140 ABSOLUTE ENCODER SINGLETURN 20 BIT WITH DRIVE-CLIQ INTERFACE (ENCODER AS20DQI) HOUSING FLANGE GEAR RATIO: 89.09 N1MAX=4500 RPM N2MAX=51 RPM, M2MAX=4570 NM MOUNTING POSITION M5-B OIL CLP VG220

SIMOTICS S-1FG1 - geared motor Bevel gearbox K109 Motor CT 600 V AH100 Mmax = 280 Nm Encoder: AS24DQI-88 / AS24DQI-72 Foot-mounted des.; transmission ratio: 11.02 N1max = 4500 rpm; N2max = 659 rpm M2max = 1320 Nm; D14 = Mounting pos. M4-A E01: Angle of rotation Y axis 5° G23: Seal longer service life G48: Oil expansion unit 1.5 l G97: Glued final stage K07: Oil CLP PG VG220 K82: Manual brake release with check N34: Spring-operated brake M2BR=80 Nm Q92: Connector position at bottom Q84: Connector outlet fixed DE Q95: Position of manual brake release at bottom R92: Screw(*)

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K89 Motor type CT 600V AH100 Mmax=108 Hollow shaft with keyway H50 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FLANGE B5 GEAR RATIO: 55.27 N1MAX=4500 RPM N2MAX=81 RPM, M2MAX=1610 NM MOUNTING POSITION M1-A LONG-LIFE SEALING OIL CLPH1 VG460 STANDARD HOLDING BRAKE

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K89 Motor type CT 600V AH100 Mmax=108 Smooth solid shaft VG50x 100 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FLANGE B5 GEAR RATIO: 55.27 N1MAX=4500 RPM N2MAX=81 RPM, M2MAX=1610 NM MOUNTING POSITION M1-A LONG-LIFE SEALING OIL CLPH1 VG460 STANDARD HOLDING BRAKE

SIMOTICS S-1FG1 Synchronous servo geared motor Bevel gearbox K89 Motor type CT 600V AH100 Mmax=108 HOLLOW SHAFT WITH SHRINK RING HS50 ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE FLANGE B5 GEAR RATIO: 55.27 N1MAX=4500 RPM N2MAX=81 RPM, M2MAX=1610 NM MOUNTING POSITION M1-A LONG-LIFE SEALING OIL CLPH1 VG460 STANDARD HOLDING BRAKE