Siemens – 7ME3723-1ED11-1UA3-Z A01

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on any pipe materials temperature higher 121°C (250°F), specification range: -40°C to +230°C (-40°F to 450°F) Outer pipe diameter >508 - 1200 mm (20 - 48 in) Pipe wall thickness >15.7 - 31.8 mm (0.62 - 1.25 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (0.5 inch)) Dual Path (two sensor pairs) Sensor: 7ME39505LA73 (FSS200, Uni-VHT-C, Gr 4, Liquid) Empty field / 1 fixed pre-assigned! Wall mount enclosure with internal DSL-modul, aluminum - epoxy coated IP 67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 2 path 9 cable entries M20x1.5 thread No EX-approval Illuminated display sensor keys NPT-adapters stainless steel 1/2inch to M20x1,5, 9 ea (for conduit connection) Standard Industry application (Liquids, e.g. water) HART, 4-20mA, active/passive, non Ex Channel 2: non-Ex, activ/passiv Current/Freq./Pulse Sensor cable set 2-pair to external DSL / transmitter, Coax cable submersible, 10 m (32.8 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Ultrasonic Clamp-on flowmeter, pipe size range 13 to 9144 mm(0.5" to 360"). Suitable for volume flow measurement of liquids and gases , for applications in water & wastewater, HVAC, power, processing and hydrocarbon industry. Transmitter FST030 Sensor FSS200 for liquid on any pipe materials temperature higher 121°C (250°F), specification range: -40°C to +230°C (-40°F to 450°F) Outer pipe diameter >813 - 9144 mm (32 - 360 in) Pipe wall thickness >31.8 - 50.8 mm (1.26 - 2.00 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (0.5 inch)) Single Path (one sensor pair) Standard Environment Aluminum wallmount, epoxy coated, NEMA 4X, IP66/67, internal DSL, internal 24 - 230 V DC/AC power, for 1 and 2 path measurement 9 cable entries with M20x1.5 thread No EX-approval Graphical display, 240x160 pixels, highlighted, sensor keys operable through window Nine 1/2 inch NPT adapters for M20x1.5 cable entry, nickel plated brass (for conduit use) For Standard Industry Applications (Liquids, e.g. Water) HART, 4-20mA active/passive, non Ex No optional inputs and outputs

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on non steel / non plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >305 - 508 mm (12.0 - 20.0 in) Pipe wall thickness >31.8 - 50.8 mm (1.26 - 2.00 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (5 inch)) Dual Path (two sensor pairs) Sensor: 7ME39505LE00 (FSS200, Uni D3C, Liquid) Standard Wall mount enclosure with external DSL, aluminum - epoxy coated IP 66/67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 4 path for SSL-cable terminal block, 11 cable entries M20x1.5 thread No EX-approval Illuminated display sensor keys Cable glands polyamide M20x1.5, 9 + 15 blind glands Standard Industry application (Liquids, e.g. water) Factory certification 2.2 to EN 10204:2004 Modbus RTU (RS485), no Ex, Ex Channel 2: non-Ex, activ/passiv Current/Freq./Pulse Channel 3: Relay FS-DSL mounting kit for stanchion pipe DN 50 (2 in) U-clamp SSL-cable 150 m (492 ft), terminated on both sides for terminal strip, can be shortened, color grey, with Ex approvals blue Enable Mass storage device function for SD-card by USB (outside USA nomally "yes"). Sensor cable set 2-pair to external DSL / transmitter, Coax cable submersible, 20 m (65.6 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on non steel / non plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >508 - 1200 mm (20 - 48 in) Pipe wall thickness >8.1 - 11.2 mm (0.32 - 0.44 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (0.5 inch)) Single Path (one sensor pair) Sensor: 7ME39505LF00 (FSS200, Uni E2C, Liquid) Empty field / 1 fixed pre-assigned! Wall mount enclosure with internal DSL-modul, aluminum - epoxy coated IP 67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 2 path 9 cable entries M20x1.5 thread IECEX: Sensors + external DSL Zone 0, 1 , 2; Wall mount enclosure Zone 2 Illuminated display sensor keys None cable glands Standard Industry application (Liquids, e.g. water) HART, 4-20mA, Ex active No optional inputs and outputs Sensor cable set 1-pair to external DSL / transmitter, Coax cable submersible, 10 m (32.8 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nickel Plated Brass M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on non steel / non plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >508 - 1200 mm (20 - 48 in) Pipe wall thickness >31.8 - 50.8 mm (1.26 - 2.00 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (5 inch)) Dual Path (two sensor pairs) Sensor: 7ME39505LF00 (FSS200, Uni E2C, Liquid) Standard Wall mount enclosure with external DSL, aluminum - epoxy coated IP 66/67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 4 path for SSL-cable terminal block, 11 cable entries M20x1.5 thread No EX-approval Illuminated display sensor keys Cable glands polyamide M20x1.5, 9 + 15 blind glands Standard Industry application (Liquids, e.g. water) Factory certification 2.2 to EN 10204:2004 Modbus RTU (RS485), no Ex, Ex Channel 2: non-Ex, activ/passiv Current/Freq./Pulse Channel 3: Relay FS-DSL mounting kit for stanchion pipe DN 50 (2 in) U-clamp SSL-cable 150 m (492 ft), terminated on both sides for terminal strip, can be shortened, color grey, with Ex approvals blue Enable Mass storage device function for SD-card by USB (outside USA nomally "yes"). Sensor cable set 2-pair to external DSL / transmitter, Coax cable submersible, 20 m (65.6 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Ultrasonic Clamp-on flowmeter, pipe size range 13 to 9144 mm(0.5" to 360"). Suitable for volume flow measurement of liquids and gases , for applications in water & wastewater, HVAC, power, processing and hydrocarbon industry. Transmitter FST030 Sensor FSS200 for liquid on plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >76 - 127 mm (3.0 - 5.0 in) Pipe wall thickness >2.0 - 3.0 mm (0.08 - 0.12 in) Mounting straps slotted (stainless steel), includes spacer-bar (Aluminum) Dual Path (two sensor pairs) Sensor: 7ME39505LD00 (FSS200, Uni C3C, Liquid) Standard Environment Aluminum wallmount, epoxy coated, NEMA 4X, IP66/67, internal DSL, internal 24 - 230 V DC/AC power, for 1 and 2 path measurement 9 cable entries with M20x1.5 thread No EX-approval Graphical display, 240x160 pixels, highlighted, sensor keys operable through window Five cable glands, six blind glands, M20x1.5, polyamide For Standard Industry Applications (Liquids, e.g. Water) Modbus RTU (RS485) Ex Non Ex, Active/Passive: Ch2: Current/Freq./Pulse, Ch3: Current/Freq./Pulse, Ch4: Relay. Enable Mass storage device function for SD-card by USB (outside USA nomally "yes"). Sensor cable set 2-pair to transmitter/ext. DSL, Coax cable submersible, 20 m (65.6 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on any pipe materials temperature higher 121°C (250°F), specification range: -40°C to +230°C (-40°F to 450°F) Outer pipe diameter >203 - 305 mm (8.0 - 12.0 in) Pipe wall thickness >3.0 - 4.1 mm (0.12 - 0.16 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (5 inch)) Dual Path (two sensor pairs) Sensor: 7ME39505LA43 (FSS200, Uni-VHT-C, Gr 3, Liquid) Standard Wall mount enclosure with internal DSL-modul, aluminum - epoxy coated IP 67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 2 path 9 cable entries M20x1.5 thread ATEX: Sensors + external DSL Zone 0, 1 , 2; Wall mount enclosure Zone 2 Illuminated display sensor keys Cable glands nickel plated brass M20x1.5, 5 + 6 blind glands Hydrocarbon application (oil table with temperature and viscosity compensation) HART, 4-20mA, Ex passive Channel 2+3: Ex, passiv Current/Freq./Pulse Channel 4: Relay Enable Mass storage device function for SD-card by USB (outside USA nomally "yes"). Sensor cable set 2-pair to external DSL / transmitter, Coax cable submersible, 10 m (32.8 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nickel Plated Brass M20 x1.5, gland sensor plastic, F-connector Measuring point number Transmitter steel 316L/1.4404 max. 20 characters Measuring point number FSS200 sensors steel 316L/1.4404 max. 20 characters

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on non steel / non plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >508 - 1200 mm (20 - 48 in) Pipe wall thickness >8.1 - 11.2 mm (0.32 - 0.44 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (0.5 inch)) Single Path (one sensor pair) Sensor: 7ME39505LF00 (FSS200, Uni E2C, Liquid) Empty field / 1 fixed pre-assigned! Wall mount enclosure with internal DSL-modul, aluminum - epoxy coated IP 67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 2 path 9 cable entries M20x1.5 thread IECEX: Sensors + external DSL Zone 0, 1 , 2; Wall mount enclosure Zone 2 Illuminated display sensor keys None cable glands Standard Industry application (Liquids, e.g. water) HART, 4-20mA, Ex active No optional inputs and outputs Sensor cable set 1-pair to external DSL / transmitter, Coax cable submersible, 10 m (32.8 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nickel Plated Brass M20 x1.5, gland sensor plastic, F-connector Enable Mass storage device function for SD-card by USB (outside USA nomally "yes").

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on non steel / non plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter 1200 - 9144 mm (48 - 360 in) Pipe wall thickness >31.8 - 50.8 mm (1.26 - 2.00 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (5 inch)) Dual Path (two sensor pairs) Sensor: 7ME39505LF00 (FSS200, Uni E2C, Liquid) Standard Wall mount enclosure with external DSL, aluminum - epoxy coated IP 66/67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 4 path for SSL-cable terminal block, 11 cable entries M20x1.5 thread No EX-approval Illuminated display sensor keys Cable glands polyamide M20x1.5, 9 + 15 blind glands Standard Industry application (Liquids, e.g. water) Factory certification 2.2 to EN 10204:2004 Modbus RTU (RS485), no Ex, Ex Channel 2: non-Ex, activ/passiv Current/Freq./Pulse Channel 3: Relay FS-DSL mounting kit for stanchion pipe DN 50 (2 in) U-clamp SSL-cable 150 m (492 ft), terminated on both sides for terminal strip, can be shortened, color grey, with Ex approvals blue Enable Mass storage device function for SD-card by USB (outside USA nomally "yes"). Sensor cable set 2-pair to external DSL / transmitter, Coax cable submersible, 20 m (65.6 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector

SITRANS FS230 Clamp-On Highly accurate flow meter in the industrial sector for water supply, for crude oil or petroleum products or for gas transport in pipelines Transmitter FST030 Sensor FSS200 for liquid on plastic pipes, specification range: -40 ° C to + 121 ° C (-40 ° F to 250 ° F) Outer pipe diameter >127 - 203 mm (5.0 - 8.0 in) Pipe wall thickness >3.0 - 4.1 mm (0.12 - 0.16 in) Frames/tracks (aluminum) includes straps (frames and spacer-bar on pipes bigger 125 mm (5 inch)) Single Path (one sensor pair) Sensor: 7ME39505LD00 (FSS200, Uni C3C, Liquid) Standard Wall mount enclosure with internal DSL-modul, aluminum - epoxy coated IP 67, NEMA 4X, internal universal power supply 24 - 240 V DC/AC (50 / 60Hz), for 1 - 2 path 9 cable entries M20x1.5 thread No EX-approval Illuminated display sensor keys None cable glands Hydrocarbon application (oil table with temperature and viscosity compensation) HART, 4-20mA, active/passive, non Ex Channel 2+3: non-Ex, activ/passiv Current/Freq./Pulse Channel 4: Relay Sensor cable set 1-pair to external DSL / transmitter, Coax cable submersible, 5 m (16.4 ft), with F-connector, shortenable, terminated on one end side, incl. cable gland Nylon M20 x1.5, gland sensor plastic, F-connector Enable Mass storage device function for SD-card by USB (outside USA nomally "yes").

SITRANS FS230 Clamp-On Ultrasonic Clamp-on flowmeter, pipe size range 13 to 9144 mm(0.5" to 360"). Suitable for volume flow measurement of liquids and gases , for applications in water & wastewater, HVAC, power, processing and hydrocarbon industry. Transmitter FST030 Sensor FSS200 for Liquid on non steel/(plastic) pipes Temperature -40°C to +121°C (-40°F to 250°F) Pipe outer diameter >50.8 - 76 mm (2.0 - 3.0 in) Pipe wallthickness >4.1 - 5.8 mm (0.16 - 0.23 in) Standard frames/tracks: includes straps (frames and spacer-bar on pipes >125 mm (0.5 inch)) Single Path (one sensor pair) Standard Environment Aluminum wallmount, epoxy coated, NEMA 4X, IP66/67, internal DSL, internal 24 - 230 V DC/AC power, for 1 and 2 path measurement 9 cable entries with M20x1.5 thread Transmitter and sensor without EX-approval Graphical display, 240x160 pixels, highlighted, sensor keys operable through window Nine 1/2 inch NPT adapters for M20x1.5 cable entry, nickel plated brass (for conduit use) For Standard Industry Applications (Liquids, e.g. Water) HART, 4-20mA active/passive, non Ex Non Ex, Active/Passive: Ch2: Current/Freq./Pulse, Ch3: None Ch4: None. 10m (32.8') Standard, Submersible Coax sensor cable pair with Nylon glands Enable Mass storage device function for SD-card by USB (outside USA nomally "yes").

SITRANS FS230 Clamp-On Ultrasonic Clamp-on flowmeter, pipe size range 13 to 9144 mm(0.5" to 360"). Suitable for volume flow measurement of liquids and gases , for applications in water & wastewater, HVAC, power, processing and hydrocarbon industry. Transmitter FST030 Sensor FSS200 for Liquid on non steel/(plastic) pipes Temperature -40°C to +121°C (-40°F to 250°F) Pipe outer diameter >76 - 127 mm (3.0 - 5.0 in) Pipe wallthickness >4.1 - 5.8 mm (0.16 - 0.23 in) Standard frames/tracks: includes straps (frames and spacer-bar on pipes >125 mm (0.5 inch)) Single Path (one sensor pair) Standard Environment Aluminum wallmount, epoxy coated, NEMA 4X, IP66/67, internal DSL, internal 24 - 230 V DC/AC power, for 1 and 2 path measurement 9 cable entries with M20x1.5 thread Transmitter and sensor without EX-approval Graphical display, 240x160 pixels, highlighted, sensor keys operable through window Nine 1/2 inch NPT adapters for M20x1.5 cable entry, nickel plated brass (for conduit use) For Standard Industry Applications (Liquids, e.g. Water) HART, 4-20mA active/passive, non Ex Non Ex, Active/Passive: Ch2: Current/Freq./Pulse, Ch3: None Ch4: None. 10m (32.8') Standard, Submersible Coax sensor cable pair with Nylon glands Enable Mass storage device function for SD-card by USB (outside USA nomally "yes").