Siemens – 7MH7152-1AB00-2AA

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 1000 mm, A= 48.8" (1240 mm) to 51.3" (1304 mm) Finish: standard, polyester painted mild steel Bearings: metric bearings (description not available)

SITRANS WM100 Motion sensor: heavy duty speed alarm switch with 100 mm measuring range. . Model: 230 V AC . . .

SITRANS WM100 A heavy-duty zero-speed alarm switch that does not require a controller. (description not available) Model: 115 V AC (description not available) (description not available) (description not available) Manufacturer's Test Certificate: According to EN 10204-2.2

MILLTRONICS SF500 A FULL FEATURE, POWERFUL INTEGRATOR DESIGNED FOR USE WITH SOLIDS FLOWMETERS INPUT VOLTAGE: AC VOLTAGE 100-240V AUXILIARY INPUT/ OUTPUT (REQUIRED FOR PID CONTROL AND ON-LINE CALIBRATION): BOARD WITH 2 ANALOG INPUTS AND 2 ANALOG OUTPUTS FEATURE SOFTWARE: STANDARD AUXILIARY MEMORY: NONE DATA COMMUNICATIONS: SMARTLINX PROFIBUS DP MODULE ENCLOSURE: STANDARD ENCLOSURE, 4 ENTRIES, M20 TRADE APPROVAL STICKER: NO TRADE APPROVAL STICKER APPROVALS: CE, CSA US/C, FM, C-TICK

MILLTRONICS BW500 A FULL-FEATURE, POWERFUL INTEGRATOR DESIGNED FOR USE WITH BOTH BELT SCALES AND WEIGHFEEDERS INPUT VOLTAGE: DC VOLTAGE 10-30V AUXILIARY INPUT / OUTPUT BOARD: NONE FEATURE SOFTWARE: BW500, 1 ... 6 LOAD CELL INPUT (ADVANCED FEATURE SET) AUXILIARY MEMORY: NONE DATA COMMUNICATIONS: SMARTLINX READY ENCLOSURE: STANDARD ENCLOSURE, 4 ENTRIES, M20 TRADE APPROVAL STICKER: NO TRADE APPROVAL STICKER APPROVALS: CE, CSA US/C, FM, C-TICK MANUFACTURER'S TEST CERTIFICATE: ACCORDING TO EN 10204-2.2

Milltronics BW500 A full-feature, powerful integrator designed for use with both belt scales and weighfeeders Input voltage: AC voltage 100-240V Auxiliary Input / Output Board: Board with 2 analog inputs and 2 analog outputs (required for PID control and on-line calibration) Feature Software: BW500, 1 ... 6 load cell input (advanced feature set) Auxiliary Memory: none Data Communications: Smartlinx PROFIBUS DP module Enclosure: standard enclosure, no entry holes Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM, C-TICK

Milltronics BW500 A full-feature, powerful integrator designed for use with both belt scales and weighfeeders Auxiliary Input / Output Board: None Feature Software: BW500, 1 ... 6 load cell input (advanced feature set) Auxiliary Memory: none Data Communications: Smartlinx PROFIBUS DP module Enclosure: standard enclosure, no entry holes Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM, C-TICK

Milltronics Motion sensing probes: heavy duty, 100 mm measuring range, for use with RMA, MFA 4p, WM300 MFA, or other control. Cable length: Standard length (per notes in model section) Model: MSP-12, 1/2" NPT cable inlet no cable Approval: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, KC, CCSAUS, FM

Milltronics Motion sensing probes: heavy duty, 100 mm measuring range, for use with RMA, MFA 4p, WM300 MFA, or other control. Cable length: Standard length (per notes in model section) Model: MSP-7, 1/2 inch NPT cable inlet, 1.5 m (5 ft) cable standard (For use directly with PLC, 3-wire) Approval: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC, CCSAUS, FM

MOTION SENSING PROBES CE: A SERIES OF MOTION SENSING PROBES USED WITH THE MFA 4P CABLE LENGTH: STANDARD LENGTH (PER NOTES IN MODEL SECTION) MODEL: MSP-12, 1/2" NPT CABLE INLET APPROVAL: CE CABLE GLAND: ADAPTOR FOR 1/2-NPT TO M20 COMPLETE WITH CABLE GLANDS (NOT FOR USE WITH XPP-5)

Remote mounted amplifier(RMA): Remote mounted amplifier for Milltronics MSP-1, MSP-3 and MSP-9 motion sensing probes . Enclosure: Aluminium enclosure, 1/2" NPT entry

Milltronics MFA 4p Motion failure alarm controller: set-point alarm controller, for use with MSP motion probes. Enclosure: NEMA 4X, Polycarbonate enclosure Input voltage: 100/115/200/230 VAC, 50/60 Hz, switch selectable. Speed detection version: standard, underspeed (U/S) or overspeed (O/S), switch selectable Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, KC, CCSAUS, FM