VEX-ELIMECS company logo
Catalog>ABB

ABB

[siemens_summary]
[catalog_children]
[catalog_search_products]
ABB

ABB

Items 7309 - 7320 of 52161 ⍾ Last modified Aug 28, 2025
Circuit Breakers Control products Drives Electric Vehicle Infrastructure Enclosed Switches Enclosures Fusegear Home and Building Automation Industrial Automation Industrial Plugs and Sockets Installation Materials Installation products Lightning Protection Modular DIN Rail Products Motors and Generators StandAlone Electronics Switches Wire Management and Connectivity

ABB ⍾ Page 610

1…608609610611612…4,347
Abb – 2TKA130031G1
Product detailsAdd to RFQ
2TKA130031G1 - Abb
The characteristics of this box are the same as the AU3.2; the difference is in the inlets. The box has 2 branch inlets for D20 conduits. There are also 3 knock-out on the side, and 2 on the bottom. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670
Abb – 2TKA130038G1
Product detailsAdd to RFQ
2TKA130038G1 - Abb
A box is attached to its base from the inside with a PMR135 installation adaptor through the opened center blank. The screw-head is covered with the plug in the adaptor. The installation adaptor is used to eliminate any measurement errors made during panelling.
Abb – 2TKA130033G1
Product detailsAdd to RFQ
2TKA130033G1 - Abb
The AU8 junction box is 53 mm high and has eight inlets for Ø 20 conduits. The box also has knock-outs for 4 side inlets and 4 bottom inlets. In wall installation the box can be attached with a AS13 support. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard...
Abb – 2TKA130040G1
Product detailsAdd to RFQ
2TKA130040G1 - Abb
If necessary, the box AU17.2 may be divided in two by using partition plate PMR345.
Abb – 2TKA130041G1
Product detailsAdd to RFQ
2TKA130041G1 - Abb
The PMR38 plug is also available separately for use with normal conduits. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130004G1
Product detailsAdd to RFQ
2TKA130004G1 - Abb
The junction box height can be increased by 13 mm by means of the AK7 extension ring. Screw distance c/c 78 mm.
Abb – 2TKA130003G1
Product detailsAdd to RFQ
2TKA130003G1 - Abb
The AK17 extension ring is 13 mm deep, and is used to modify the AU17.2 mounting.
Abb – 2TKA130002G1
Product detailsAdd to RFQ
2TKA130002G1 - Abb
The AK14 extension ring is used to change the depth of the AU8 and AU19 junction boxes, so that conduiting can take place above the concrete reinforcement. It gives a 75 mm space between the top level of the cast and the conduits; the AU19 gives a space of 67 mm.
Abb – 2TKA130008G1
Product detailsAdd to RFQ
2TKA130008G1 - Abb
The AS15 is designed to be used as a connector between AUS15.2 mounting boxes. Open needed knock-out holes on mounting boxes for the interconnector and install the boxes on the wall (board). Mount the interconnector in place from the inside of a box, to create a route for wires between boxes. Note
Abb – 2TKA130005G1
Product detailsAdd to RFQ
2TKA130005G1 - Abb
The AS12 strain-relief inlet is used in conduitless flush mounting to fasten 5 x 2,5 mm² cables to the mounting boxes or junction boxes. The boxes are installed in the standard way in the board or other structure. (Conduitless flush mounting is acceptable in hollow structures under special circumstances). Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130009G1
Product detailsAdd to RFQ
2TKA130009G1 - Abb
The AS20 bushing insulator is used to attach conduit extensions, which have locking springs and a diameter of 20 mm, to a concrete casting mould. After the mould has been dismantled, an installation pipe of the same size can be connected to the insulator, and the piping can be continued. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130010G1
Product detailsAdd to RFQ
2TKA130010G1 - Abb
The AS25 installation plug is used for fixing mounting/junction boxes through their base onto, for instance, concrete casting moulds. When the casts are removed, the plugs break at the groove that is level with the base. Made of halogen free material (IEC/61249-2-21).