VEX-ELIMECS company logo
Catalog>ABB

ABB

[siemens_summary]
[catalog_children]
[catalog_search_products]
ABB

ABB

Items 7321 - 7332 of 52161 ⍾ Last modified Aug 28, 2025
Circuit Breakers Control products Drives Electric Vehicle Infrastructure Enclosed Switches Enclosures Fusegear Home and Building Automation Industrial Automation Industrial Plugs and Sockets Installation Materials Installation products Lightning Protection Modular DIN Rail Products Motors and Generators StandAlone Electronics Switches Wire Management and Connectivity

ABB ⍾ Page 611

1…609610611612613…4,347
Abb – 2TKA130010G1
Product detailsAdd to RFQ
2TKA130010G1 - Abb
The AS25 installation plug is used for fixing mounting/junction boxes through their base onto, for instance, concrete casting moulds. When the casts are removed, the plugs break at the groove that is level with the base. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130026G1
Product detailsAdd to RFQ
2TKA130026G1 - Abb
The box AU17.2 has knock-outs for 11 inlets on the side, and 6 on the bottom. It can accommodate a device with a triple inlet. _x000D_If necessary, the box may be divided in two by using partition plate PMR345. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670
Abb – 2TKA130020G1
Product detailsAdd to RFQ
2TKA130020G1 - Abb
The AUS15.2 mounting box is used in buildings that have board walls. The holes are made with a hole saw (AT1, or equivalent). After the required conduit or cable inlets have been knocked out, the box is inserted in the hole. Turning the screws clockwise tightens the fastener against the board and secures the box in place. Conduits and cables...
Abb – 2TKA130029G1
Product detailsAdd to RFQ
2TKA130029G1 - Abb
The mounting box is designed for installation in all new buildings and in prefabricated building elements, and can be used with cast materials. It has a total of five knock-out inlets, two of which are on the same side. The bottom of the box provides access for two rear inlets. The boxes can be connected to each other with the...
Abb – 2TKA130027G1
Product detailsAdd to RFQ
2TKA130027G1 - Abb
The AU19 junction box has knock-outs for 8 inlets and 4 bottom inlets. The box can be fastened using side nailing or a PMR577 support. The box has four screw pillars, two for M4 screws and two for 3,5mm universal screws. The box is possible to install in cramped spaces. The depth, 47 mm, is the same as the depth...
Abb – 2TKA110001G1
Product detailsAdd to RFQ
2TKA110001G1 - Abb
The AM11 earthing terminal is used, for example, for the potential equalization of air-conditioning and ventilation ducts. The earthing terminal has a single >10 mm² Cu terminal. The terminal bar is made of tinned copper. It is affixed with two pull rivets (pop-rivets), Ø 3,2 mm, in the air-conditioning or ventilation duct and the protective lead is connected to the...
Abb – 2TKA003870G1
Product detailsAdd to RFQ
2TKA003870G1 - Abb
Use to adapt Jussi center plate into Basic 55 cover frames.
Abb – 2TKA003883G1
Product detailsAdd to RFQ
2TKA003883G1 - Abb
There are terminals for each contact of the socket outlet for max 4 rigid wires. No X-terminals.
Abb – 2TKA003967G1
Product detailsAdd to RFQ
2TKA003967G1 - Abb
The AU8 junction box is 73 mm high and has eight inlets for Ø 20 conduits. Two of the Ø 20 inlets are equipped with removable reducers for adjusting them to fit Ø 16 conduits. The box also has knock-outs for 4 side inlets and 4 bottom inlets. In wall installation the box can be attached with a AS13 support....
Abb – 2TKA110010G1
Product detailsAdd to RFQ
2TKA110010G1 - Abb
In surface mounting, a cover is used to protect AM4 and AM5. The cover has provisions for the conductors to fit to the bar’s spacing and it is fixed on the wall with two screws.
Abb – 2TKA130001G1
Product detailsAdd to RFQ
2TKA130001G1 - Abb
The AK13 is a smooth conversion cover designed for situations when flush mounting is converted to surface mounting. The cover has 8 knock-outs and is delivered with screws. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA110005G1
Product detailsAdd to RFQ
2TKA110005G1 - Abb
The potential earthing bar AM5 is intended for the connection of system earthing conductors in buildings. Into AM5 it is possible to connect 5 pcs max. 50 mm? conductors. The bar is made of tinned copper and fitted with zinc-plated steel screws and tracking-resistant thermoplastic spacers.